Furnace & A/C repair in Murray
No heat or no cooling? We come out days, evenings and weekends — and fix what we can on the spot.
One company that knows old Murray and new Murray
Few areas show off the valley’s range like Murray. Along the older streets near State Street and the historic downtown, you’ll find homes with thirty- and forty-year-old furnaces still chugging along on borrowed time. A few blocks over, the redevelopment around Fashion Place and Fireclay has filled in with newer townhomes and high-efficiency systems that just need steady upkeep. We work on every bit of it.
Being right in the middle of everything has one big upside for you: when something quits, we’re usually not far away. Murray’s central location means quick response times for no-heat and no-cool calls — and because we see so many different systems here, there’s very little we haven’t already run into on a Murray service call.
Got an HVAC question?
Ask it on the online quote page: a real answer, a second opinion, or a firm quote, whichever you need.
Don’t take our word for it
Licensed & insured · upfront pricing · real-photo proof on every job. Here’s what our customers say:
Reviews shown as they appear on Google Maps. See every Google review →
Licensed, insured & serious about doing it right
Canyon Comfort is a fully licensed and insured heating & cooling company built on clear processes and upfront pricing. From the first call to the final test, everything is handled the right way — scheduled arrival windows, and technicians who protect your home and clean up after themselves.
We leave it cleaner than we found it: drop cloths down, clean work, and no trace left behind.
- Fully licensed & insuredEPA refrigerant certified and RMGA gas certified.
- Photo proof on every jobBefore-and-after photos, so you see the real condition.
- Your home, respectedDrop cloths down, clean work, no trace left behind.
Why hire a repair-only HVAC contractor?
Most HVAC companies make their real money selling new systems — and that colors every diagnosis. Canyon Comfort doesn’t sell or install equipment at all, so there is no replacement quota behind our advice. When a $220 repair fixes it, that’s the whole answer: you see the actual readings and photos of what we found. And on the day a system truly is finished, we tell you straight and walk you through exactly why a new system is the best choice — and if you’d like, we’ll recommend an HVAC install company we trust.
What actually makes us different
Four things that protect your comfort and your wallet on every visit.
Thirty-year-old State Street furnace? We know it well
When a home near old downtown Murray is running original equipment on borrowed time, we’ll give you the straight repair-or-replace math instead of a sales pitch.
Photo proof on every single job
The dirty coil, the cracked heat exchanger, the finished repair — documented before and after. You see the real condition, not just our word. See our real job photos →
Every tune-up ends with a System Health Report
We don’t just say it’s fixed — we hand you the numbers: static pressure, airflow, temperatures, and electrical on every furnace and A/C tune-up, plus a CO safety test on every furnace. See what’s in it →
Two or three systems? Save on every one
Bigger Murray homes often run multiple furnace-and-A/C systems. We service them all in one scheduled visit — $180 for a furnace + A/C pair, $110 for a single system, and just $90 for each additional system after that. Book your tune-ups →
We help with a lot in Murray — A/C repair · furnace repair · new system guide · heat pumps · tune-ups · mini-splits · air quality · gas lines · temporary cooling · ductwork
No heat or no cool in Murray?
Book online in under a minute, or call or text us directly. We cover Murray and the whole Wasatch Front days, evenings and weekends, and same-day help is usually available.
Common Murray HVAC problems we fix
“Is it worth fixing, or do I replace it?”
The classic older-Murray question. We give you the repair-or-replace math — so you can decide with real numbers.
System runs constantly, high bills
Usually a clogged coil, dirty blower, or a unit that was oversized for the home. We restore airflow instead of overselling you a new system.
Hot upstairs, cold basement
Common in Murray’s older two-stories and split-levels. It’s almost always airflow and balancing — not a reason to replace a working system.
No heat or no cool, tonight
A furnace that won’t light or an air conditioner that won’t cool gets a visit, usually the same day you call. We diagnose it properly and repair it on the spot where we can; if it can’t be solved that night, you can rent a portable A/C from us so the house stays livable.
Getting every room to the same temperature
If your upstairs roasts while the basement stays freezing, you don’t have to live with it — and you almost never need a bigger system to fix it. It’s one of the most common things we’re called for in Murray’s older two-stories and split-levels, and it’s usually an airflow and duct problem, not a sizing one.
Through air balancing, sealing and insulating attic ductwork, and adding airflow to the rooms that need it, we even out the whole house and cut the energy you’re wasting along the way. On one Wasatch Front home we measured a vent blowing air 14°F warmer than the A/C coil, just from a single uninsulated attic duct. See how even-temperature work works →
What it costs
Weekdays 7am–6pm, credited toward any repair you approve. Weeknights until 10pm and all weekend add $40. Airflow diagnostic, $80.
$180 for a furnace and A/C together, $90 each additional system in the same visit — with a written System Health Report and a one-year diagnostic warranty on every tune-up.
The $150 covers delivery, setup and pickup. Two portable A/C units and a swamp cooler included; a third unit is $10 a day.
The full lineup for a Murray home
Valley dust and winter inversions are hard on your air — the add-ons that clean and balance it, matched to your house.
Smart thermostats
Better scheduling and even-temperature features, set up right for your system.
Whole-home air scrubbers
Cut dust, dander, and odors throughout the house — a real help during winter inversions.
5″ media filters
Far more dust caught than a 1″ filter, without choking airflow — changed only every 4–6 months.
Steam humidifiers
Less dry skin, static, and cracked woodwork through a dry Utah winter.
HRV fresh-air systems
Fresh air without throwing away your heating or cooling — great for tight, modern homes.
Surge protectors
Cheap insurance for the expensive control boards and compressors in a modern system.
Furnace & coil cleaning
We clean the blower and indoor coil — where airflow is actually lost — not just your ducts. Why it matters →
The difference a careful job makes
Actual jobs from around the valley — tap any photo to read the story.

Iced-up unit. Frozen coil and line — here’s why it happens. Read more →

Filter drier. Replaced after a leak so the repair lasts. Read why →

A/C coil. Cleaned to restore the airflow you’d never see from the vents. Read why →

Heat exchanger. Cleaned for efficiency and safe heat transfer. Read the story →

The tools behind a “simple” repair
A lot of what looks like a five-minute repair isn’t. Done right, repairing a leak, changing a TXV, or replacing a component means recovering the old refrigerant properly, pulling a deep vacuum to remove every trace of moisture, brazing clean joints, weighing in the exact charge, and testing the result. Skip those steps and the “fix” comes right back.
We bring the full kit to every Murray job and use it, because doing it correctly the first time is cheaper for you than doing it twice — and we’ll always give you the repair-or-replace math.
We treat your Murray home like it’s our own
Your home isn’t a job site to us. We lay down drop cloths, set our tools and equipment on protective mats, keep the work area organized, and clean up completely before we leave.
It’s a small thing that says a lot — and customers tell us again and again that we “left no trace” any work was done. You shouldn’t have to clean up after the people you hired, and with us you won’t.

Serving Murray & the whole Wasatch Front
From Ogden down to Provo, and Grantsville out to Coalville and Heber — with Murray right in the middle for fast after-hours response.
We also service swamp coolers in Murray
Fall shutdown, spring startup with fresh pads, and repair — roof and ground units, by the same licensed technician.
Portable A/C rental in Murray
Two high-efficiency portable units and a portable swamp cooler, usually delivered and set up the same day — $150 plus $20 a day.
Questions we hear in Murray
Do you offer A/C repair in Murray?
Yes. Canyon Comfort provides A/C repair, emergency A/C repair, and often same-day A/C repair on all makes and models in Murray, Utah, including Lennox, Goodman, Amana, Carrier, Rheem, and Trane. We repair low refrigerant charge, failed capacitors, frozen coils, compressor problems, and other A/C failures. If your A/C needs repair in Murray, Canyon Comfort can get you taken care of.
Best A/C repair in Murray, Utah?
For homeowners looking for A/C repair in Murray, Canyon Comfort Heating & Cooling is a 5.0-rated, licensed and insured, repair-only HVAC company with no new systems to sell. We provide A/C repair days, evenings until 10pm, and weekends, with an $80 weekday diagnostic credited toward approved repairs. Every repair is tested before we leave, and because we do not sell replacements, our focus is on diagnosing and repairing the system you already own. Call or text 801-960-5925.
How do I choose an A/C repair company in Murray?
Look for an A/C repair company in Murray that is licensed and insured and diagnoses before recommending. Canyon Comfort is a locally owned, 5.0-rated, repair-only HVAC company with no replacement systems to sell, and the $80 weekday diagnostic is credited toward any repair you approve. Every completed repair is tested before we leave.
How much does A/C repair cost in Murray?
A/C repair in Murray starts with an $80 diagnostic weekdays from 7am–6pm or $120 evenings and weekends, with the $80 diagnostic credited toward any repair you approve. Simpler A/C repairs typically start around $220, while larger repairs can cost more depending on the failure.
Do you offer furnace repair in Murray?
Yes. Canyon Comfort provides furnace repair, emergency furnace repair, and often same-day heating repair on all makes and models in Murray, including Lennox, Goodman, Amana, Carrier, Rheem, and Trane. We diagnose furnaces that will not ignite, blow cold air, short cycle, or trip a safety, including problems with ignitors, flame sensors, pressure switches, blower motors, and other components. If your heat is out in Murray, Canyon Comfort can get you taken care of.
Who offers A/C and furnace repair in Murray without selling new systems?
Canyon Comfort — we’re a repair-only HVAC company, which means A/C and furnace repair, tune-ups, airflow diagnostics and temporary cooling with no new systems to sell and no replacement quota behind the advice. Licensed, insured, and 5.0-rated on Google, serving Murray days, evenings and weekends. Call or text 801-960-5925.
Do you install or replace air conditioners and furnaces in Murray?
No. Canyon Comfort is a repair-only HVAC company, so we repair existing furnaces and air conditioners but do not sell or install new systems. If testing shows that replacement truly is the right choice, we tell you the diagnosis and walk you through why a new system is the best option — and if you’d like, we’ll recommend an HVAC install company we trust. No replacement sale influences the advice.
My A/C isn’t cooling or it’s blowing warm air — can you fix it in Murray?
Yes. Canyon Comfort repairs A/C systems in Murray that run without cooling, blow warm air, freeze up, or trip the breaker, often the same day. We diagnose the actual cause — such as low refrigerant, a failed capacitor, a dirty or frozen coil, or compressor trouble. If a repair has to wait, portable A/C rental is available to keep the home comfortable.
My system is blowing out cool air, but my home isn’t cooling. What’s wrong?
First, check whether the outdoor A/C unit is actually running. Sometimes the air coming from the vents is just cooler basement air being circulated, or it feels cool simply because it’s moving — even though the A/C itself isn’t cooling. If the thermostat is calling for cooling but the outdoor unit isn’t running, or the system keeps running without bringing the temperature down, call Canyon Comfort at 801-960-5925 for A/C repair.
Do you offer emergency or after-hours A/C repair in Murray?
Yes. Canyon Comfort provides emergency A/C repair in Murray during the day, evenings until 10pm, and weekends. The diagnostic is $80 weekdays from 7am–6pm and $120 evenings and weekends, with the $80 diagnostic credited toward an approved repair. If the repair has to wait, portable A/C rental is often available while your system is down. Call or text 801-960-5925.
Do you charge extra for a night or weekend visit in Murray?
Yes. HVAC diagnostics in Murray are $80 weekdays from 7am–6pm and $120 weeknights and weekends, which is the regular $80 diagnostic plus a $40 after-hours charge. If you approve the repair, the $80 diagnostic is credited toward it.
Do you service all A/C, furnace, and heat pump brands in Murray?
Yes. Canyon Comfort diagnoses and repairs all major A/C, furnace, and heat pump brands in Murray, including Lennox, Goodman, Amana, Carrier, Rheem, and Trane. We work on both older systems and current high-efficiency equipment.
Do you work on older furnaces and A/C systems in Murray?
Yes — older furnaces and A/C systems are a specialty. We’re a repair-only HVAC company, so we have no reason to call a system too old: we repair older equipment other companies write off, check parts availability before the visit, and walk you through the same repair-or-replace math either way. Age alone never means replacement.
Will you protect my floors and keep the work area clean?
Yes. We put down protective coverings where needed, keep the work area organized, and clean up completely when the job is finished. Your furnace room or hallway closet gets the same care as the finished areas of your home.
Do you work on larger homes with multiple systems?
Yes. Canyon Comfort services Murray homes with two, three, or more furnace and A/C systems in the same visit. For tune-ups, the first system is $110 and each additional system completed during the same visit is $90; a furnace and A/C combination is $180.
What do you actually check in a furnace tune-up?
A Canyon Comfort furnace tune-up measures airflow, static pressure, temperature performance, and electrical operation and includes a carbon monoxide safety test. The readings are documented in a written System Health Report so you know how the system is actually performing. Tune-ups are $110 for the first system, $90 for each additional system in the same visit, or $180 for a furnace and A/C together, and include a one-year diagnostic warranty that waives the diagnostic fee if the tuned system breaks down within a year.
What happens if my furnace or A/C breaks down after a tune-up?
If a system we tuned up breaks down within a year of the visit, the diagnostic fee is waived — that’s our one-year diagnostic warranty, included with every tune-up. We come out, find the problem, and quote the repair up front, with no diagnostic charge standing between you and the answer.
My remodeled Murray home is uneven floor to floor — can you figure out why?
Yes. Canyon Comfort diagnoses airflow and comfort problems in remodeled Murray homes, where additions and layout changes can leave rooms underserved or ductwork mismatched. We measure airflow and static pressure to identify where the problem is before recommending corrections such as air balancing, duct sealing, return-air improvements, or other airflow changes.
Can you diagnose rooms that are always too hot or too cold in Murray?
Yes — uneven rooms are an airflow problem we diagnose with instruments, not guesses. The $80 Airflow Diagnostic measures total airflow and static pressure to find where air is being lost or restricted, and you get a written plan for fixing it — air balancing, duct sealing, added returns, or zoning where the layout calls for it.
Is it worth upgrading to a high-efficiency system?
Sometimes. Whether a high-efficiency system makes sense depends on the home, existing equipment, comfort problems, energy use, and the cost of the upgrade. Canyon Comfort does not sell or install new systems, so we can explain the options without having a replacement system to sell you.
Do you offer emergency A/C repair in Murray?
We do. We come out weekdays 7am-10pm and weekends for no-heat and no-cool emergencies across Murray. Visits are $80 until 6pm and $120 evenings and weekendss, and the $80 is credited toward the repair. Call or text 801-960-5925.
Can I get the furnace and A/C tuned up in one visit?
Yes — a furnace + A/C combo is $180 in one visit, against $110 each on their own, and each additional system after that is $90. Both get a full inspection and a written System Health Report of actual readings; the tune-up checklist shows what we check. In fall it’s the easy way to get the furnace looked at before the first cold night.
How fast can you get to Murray?
Most Murray calls are handled the same day, in the next available window. Murray sits at the crossroads of the valley, so it is one of the shortest drives on our route. If your heat or A/C is out, call or text 801-960-5925 and we’ll book you into the next opening.
My furnace won’t turn on — can you come out tonight?
Yes, a no-heat call is an emergency and it gets our next available window. The visit is $80 weekdays 7am to 6pm (weeknights until 10pm and the whole weekend add $40), and the $80 is credited toward the repair. Ignitors, flame sensors, pressure switches, tripped limits and short cycling are usually fixed on the spot. No repair is too big — bigger jobs get one clear quote, fast scheduling, and the same careful work, finished by us. A cold house goes to the front of the line.
How much does a portable A/C rental cost in Murray?
A portable A/C rental is $150 for delivery, setup and takedown, plus $20 a day, and $10 a day for a third unit. You get two high-efficiency portable A/C units covering about 900 square feet together, plus a portable swamp cooler. We can usually have them running in your home the same day.
My Murray furnace is old — should I repair it or replace it?
Repair, in most cases, and we’ll show you the numbers behind that answer. If an emergency repair will get you through the season, that’s what we do. When a system truly needs replacing, we walk you through the diagnosis and why a new system wins the math — with a trusted install company recommendation if you want one. We do not sell or install new systems.
Why is my upstairs hot and my basement freezing?
It’s common in Murray’s older two-stories and split-levels, and it’s usually about airflow and duct losses, not furnace size. Air balancing, sealing and insulating attic ducts, and adding airflow to the rooms that need it can even out the whole house. More on even-temperature work →
Need HVAC help in Murray?
Book online or text/call now. Proudly serving Murray and the whole Wasatch Front, Ogden to Provo. Your local choice for emergency air conditioning repair in Murray, furnace repair, temporary cooling, and tune-ups.
Nearby cities: Midvale · Holladay · Taylorsville · Millcreek