Valley Floor to the Point of the Mountain

Furnace & A/C repair in Draper

Furnace or A/C down? We’re available seven days a week to get you back up and running, often the same day.

$80 diagnostic, credited toward your repair. Repair-only: we fix furnaces, A/Cs, heat pumps and mini-splits, we don’t install them.

5.0 on Google Real Photo Proof No Corners Cut Locally Owned
Local HVAC for Draper

What a Draper visit looks like

Up around Corner Canyon and SunCrest, the visit starts with combustion and venting: burners checked for thinner air, flue draft checked against the wind, and a CO safety test on every furnace.

Down on the valley floor, the call is usually a three-story home that bakes upstairs and freezes in the basement. That is airflow and duct loss, not equipment size, so we measure static pressure and delivery before recommending anything.

Ask Canyon Comfort

Got an HVAC question?

Ask it on the online quote page: a real answer, a second opinion, or a firm quote, whichever you need.

Ask a Question →
★★★★★

Don’t take our word for it

Licensed & insured · real-photo proof on every job. Here’s what our customers say:

Read our reviews on Google →
Who you’re hiring

Licensed, insured & serious about doing it right

Canyon Comfort is a fully licensed and insured heating & cooling company built on clear processes. From the first call to the final test, everything is handled the right way — scheduled arrival windows, drop cloths down and a full cleanup before we leave.

THE CANYON COMFORT STANDARD
  • Fully licensed & insuredEPA refrigerant certified and RMGA gas certified.
  • A System Health ReportYour system’s actual readings, emailed after every tune-up and pre-purchase inspection.
  • Your home, respectedDrop cloths down, clean work, no trace left behind.
Why homeowners call us

More than just “it’s fixed”

Here’s what you actually get when you call Canyon Comfort.

A System Health Report on every tune-up

We hand you the numbers — static pressure, airflow, temperatures, electrical — written down, so you see exactly what we found and fixed. See what’s in it →

Photo proof, before and after

The dirty coil, the cracked part, the finished repair — all documented. You see the real condition of your system, not just our word. See real jobs →

Why Draper homes are different

Elevation changes the math

At Draper’s higher elevations, a furnace actually delivers less heat than its sea-level rating, and combustion has to be tuned for thinner air. A system that was oversized to “make up for it” ends up short-cycling and wearing out early. The wind and colder nights up near the Point of the Mountain add real load on top of that.

That is exactly why a thorough diagnosis matters up here. We measure and tune for your home and its elevation, so the system runs efficiently and lasts the years it should.

What we check on a Draper system

  • Airflow & static pressure measured
  • Combustion tuned for elevation
  • Heat-exchanger & CO safety
  • Short-cycling & oversizing
  • Flue draft & combustion air
  • Multi-story airflow balance
  • Filter & blower airflow
  • Existing zoning & dampers
What we do in Draper

Emergency repair, temporary cooling & airflow

We’re licensed, and we run days, evenings and weekends: emergency repair on every brand, portable A/C to keep you cool while you wait, and airflow and air-quality work.

Emergency furnace & heating repair

Every make of gas furnace, electric furnace, and heat pump — a no-heat emergency diagnosed right, combustion-checked, days, evenings and weekends.

Emergency air conditioning repair

Low refrigerant, bad capacitors, frozen or dirty coils, weak airflow — the real cause found and shown to you, not guessed at. No repair is too big — bigger jobs get one clear quote, fast scheduling, and the same careful work, finished by us.

Portable A/C rental in Draper

When the A/C is down or a part will not arrive until tomorrow, we bring two high-efficiency portable A/C units and a portable swamp cooler — roughly 900 square feet of cooling — set them up, and take everything down once the repair is finished. $225 covers delivery, setup and takedown, plus $25 a night; add a third portable A/C for $10 a night. Portable A/C rental pricing →

Heat pump & dual-fuel repair

Cold-climate heat pumps and dual-fuel systems diagnosed and repaired when they quit on the coldest snaps up the bench.

Mini-split repair

Ductless mini-split repair for the bonus rooms, basements, and upper floors of Draper’s multi-story homes.

Tune-ups & safety checks

Seasonal maintenance and combustion-safety checks — especially important for the harder-working systems at higher elevations.

Even temperatures & duct work

Air balancing, attic-duct sealing & insulation, and added returns to fix the hot-upstairs/cold-basement problem common in Draper’s multi-story homes. Learn more →

Indoor air quality

Smart thermostats, air scrubbers, media filters, and humidifiers — great upgrades for Draper’s newer, tighter homes.

Ductwork & duct sealing

Ductwork repair and duct sealing to fix the air loss and restrictions behind uneven comfort — part of our airflow work.

No sales motive

Why hire a repair-only HVAC contractor?

Canyon Comfort doesn’t sell or install furnaces, A/Cs, heat pumps or mini-splits, so there is no replacement quota behind our advice. When a $220 repair fixes it, that’s the whole answer: you see the actual readings and photos of what we found. And on the day a system truly is finished, we tell you straight and walk you through why a new system is the best choice — and if you’d like, we’ll recommend a trusted local installation company.

Where we go further

Three-story home? Let’s even it out.

Draper is full of larger multi-story homes, and they’re famous for the same complaint: the top floor bakes, the main floor is fine, and the basement stays cold. It’s one of the most common things we’re called for here — and it’s almost never a reason to rip out a working system.

Through air balancing, sealing and insulating attic ductwork, adding airflow to the rooms that need it, and zoning adjustments where it makes sense, we get every floor closer to the same comfortable temperature — and cut the energy you’re wasting along the way. On one Wasatch Front home we measured a vent blowing air 14°F warmer than the A/C coil, just from a single uninsulated attic duct. How the Airflow Assessment works →

Pricing

What it costs

SERVICE RATES
$80 · service call

Credited toward any repair you approve. Airflow Assessment, $250.

$110 · tune-up per system

$180 for a furnace and A/C together — with a written System Health Report and a one-year diagnostic warranty on every tune-up (a free diagnostic visit if a tuned system acts up within a year).

$225 + $25/night · portable A/C rental

The $225 covers delivery, setup and takedown. Two portable A/C units and a portable swamp cooler are included; add a third portable A/C for $10 a night.

See full pricing & service hours →

No corners cut

Furnace repair at Draper’s elevation

A furnace that won’t ignite gets the same evening and weekend response as a July cooling call — no separate schedule, no waiting for Monday. At Draper’s elevation, where combustion has to be tuned for thinner air, a $110 fall tune-up with a written System Health Report catches ignition and safety problems before the first cold night.

Modern systems punish shortcuts

High-efficiency equipment — the kind in most Draper homes — is less forgiving than the old single-stage units, not more. A sloppy refrigerant charge, a vacuum that wasn’t pulled deep enough, or a control board left on default settings will quietly rob a modern system of the performance you paid for, and the homeowner just sees higher bills.

We bring the full kit to every Draper job and use it: a real diagnosis, proper recovery and deep vacuum, clean brazed joints, the exact charge weighed in, and the system commissioned to spec before we leave — plus the repair-or-replace math.

Tools and manifold gauges Canyon Comfort brings to an HVAC repair in Draper
Canyon Comfort sets equipment on a drop cloth to protect the property during a Draper HVAC repair
Respect for your home

We leave it cleaner than we found it

Your home isn’t a job site to us. We lay down drop cloths, set our tools and equipment on protective mats, keep the work area organized, and clean up completely before we leave.

It’s a small thing that says a lot — and customers tell us again and again that we “left no trace” any work was done. You shouldn’t have to clean up after the people you hired, and with us you won’t.

Comfort & air-quality upgrades

The full lineup — sized for your home

Quality add-ons from the brands we trust, matched to your Draper home and its elevation.

CONTROL

Smart thermostats

Zoned scheduling and remote control, set up right — lower bills, steadier comfort.

CLEANER AIR

Whole-home air scrubbers

Cut dust, dander, and odors throughout the house — a real help during winter inversions.

FILTRATION

5″ media filters

Far more dust caught than a 1″ filter, without choking airflow — changed only every 4–6 months.

HUMIDITY

Steam humidifiers

Less dry skin, static, and cracked woodwork through a dry, high-elevation winter.

FRESH AIR

HRV fresh-air systems

Fresh air without throwing away your heating or cooling — great for Draper’s tight new builds.

PROTECTION

Surge protectors

Cheap insurance for the expensive control boards and compressors in a modern system.

AIRFLOW

Furnace & coil cleaning

We clean the blower and indoor coil — where airflow is actually lost — not just your ducts. Why it matters →

Across a fast-growing city

From established east-side homes to brand-new builds

Draper has grown about as fast as anywhere in the valley, and the housing reflects it. Up on the east side and the hillside climbing toward Corner Canyon and SunCrest, you’ll find larger custom and semi-custom homes — multi-story, often with two systems, and very sensitive to elevation and exposure. Down toward the valley floor and the Silicon Slopes corridor, newer subdivisions are full of tight, efficient homes where smart thermostats and high-efficiency equipment really pay off.

We work across all of it, fixing the ductwork and zoning problems that cause uneven comfort, not just the equipment itself. Timing matters here: with cold arriving early up high, a furnace tune-up in early fall catches weak igniters and tired parts before the first hard freeze, and a spring A/C tune-up gets you ahead of the summer sun on those big south- and west-facing windows so many Draper homes have.

Where we work

Serving Draper & the whole Wasatch Front

From Draper’s valley floor up to SunCrest — and out across the Wasatch Front, Ogden down to Provo and Grantsville out to Coalville and Heber.

While you wait

Portable A/C rental in Draper

Two portable A/C units and a portable swamp cooler for $225 plus $25 a night — usually set up the day you call.

Portable A/C Rental →
Draper HVAC FAQ

Questions we hear in Draper

Do you offer A/C repair in Draper?

Yes. Canyon Comfort provides A/C repair, emergency A/C repair, and often same-day A/C repair on all makes and models in Draper, Utah, including Lennox, Goodman, Amana, Carrier, Rheem, and Trane. We repair low refrigerant charge, failed capacitors, frozen coils, compressor problems, and other A/C failures. If your A/C needs repair in Draper, Canyon Comfort can get you taken care of.

How do I choose an A/C repair company in Draper?

Look for an A/C repair company in Draper that is licensed and insured and diagnoses before recommending. Canyon Comfort is a locally owned, highly rated, repair-only HVAC company with no replacement systems to sell, and the $80 diagnostic is credited toward any repair you approve. Every completed repair is tested before we leave.

How much does A/C repair cost in Draper?

A/C repair in Draper starts with an $80 diagnostic, credited toward any repair you approve. Simpler A/C repairs typically start around $220, while larger repairs can cost more depending on the failure.

Do you offer furnace repair in Draper?

Yes. Canyon Comfort provides furnace repair, emergency furnace repair, and often same-day heating repair on all makes and models in Draper, including Lennox, Goodman, Amana, Carrier, Rheem, and Trane. We diagnose furnaces that will not ignite, blow cold air, short cycle, or trip a safety, including problems with ignitors, flame sensors, pressure switches, blower motors, and other components. If your heat is out in Draper, Canyon Comfort can get you taken care of.

Who offers A/C and furnace repair in Draper without selling new systems?

Canyon Comfort — we’re a repair-only HVAC company, which means A/C and furnace repair, tune-ups, airflow assessments and temporary cooling with no new systems to sell and no replacement quota behind the advice. Licensed, insured, and highly rated on Google, serving Draper days, evenings and weekends. Call or text 801-960-5925.

Do you install or replace air conditioners and furnaces in Draper?

No. Canyon Comfort is a repair-only HVAC company, so we repair existing furnaces and air conditioners but do not sell or install new systems. If testing shows that replacement truly is the right choice, we tell you the diagnosis and walk you through why a new system is the best option — and if you’d like, we’ll recommend a trusted local installation company. No replacement sale influences the advice.

My A/C isn’t cooling or it’s blowing warm air — can you fix it in Draper?

Yes. Canyon Comfort repairs A/C systems in Draper that run without cooling, blow warm air, freeze up, or trip the breaker, often the same day. We diagnose the actual cause — such as low refrigerant, a failed capacitor, a dirty or frozen coil, or compressor trouble. If a repair has to wait, portable A/C rental is available to keep the home comfortable.

My system is blowing out cool air, but my home isn’t cooling. What’s wrong?

First, check whether the outdoor A/C unit is actually running. Sometimes the air coming from the vents is just cooler basement air being circulated, or it feels cool simply because it’s moving — even though the A/C itself isn’t cooling. If the thermostat is calling for cooling but the outdoor unit isn’t running, or the system keeps running without bringing the temperature down, call Canyon Comfort at 801-960-5925 for A/C repair.

Do you offer emergency or after-hours A/C repair in Draper?

Yes. Canyon Comfort provides emergency A/C repair in Draper during the day, evenings until 10pm, and weekends. The diagnostic is $80 weekdays from 7am–6pm and $120 evenings and weekends, with the $80 diagnostic credited toward an approved repair. If the repair has to wait, portable A/C rental is often available while your system is down. Call or text 801-960-5925.

Do you charge extra for a night or weekend visit in Draper?

Yes. HVAC diagnostics in Draper are $80 weekdays from 7am–6pm and $120 weeknights and weekends, which is the regular $80 diagnostic plus a $40 after-hours charge. If you approve the repair, the $80 diagnostic is credited toward it.

Do you service all A/C, furnace, and heat pump brands in Draper?

Yes. Canyon Comfort diagnoses and repairs all major A/C, furnace, and heat pump brands in Draper, including Lennox, Goodman, Amana, Carrier, Rheem, and Trane. We work on both older systems and current high-efficiency equipment.

Do you work on older furnaces and A/C systems in Draper?

Yes — older furnaces and A/C systems are a specialty. We’re a repair-only HVAC company, so we have no reason to call a system too old: we repair older equipment, check parts availability before the visit, and walk you through the same repair-or-replace math either way. Age alone never means replacement.

Will you protect my floors and keep the work area clean?

Yes. We put down protective coverings where needed, keep the work area organized, and clean up completely when the job is finished. Your furnace room or hallway closet gets the same care as the finished areas of your home.

What do you actually check in a furnace tune-up?

A Canyon Comfort furnace tune-up measures airflow, static pressure, temperature performance, and electrical operation and includes a carbon monoxide safety test. The readings are documented in a written System Health Report so you know how the system is actually performing. Tune-ups are $110 for a furnace or an A/C, or $180 for a furnace and A/C together, and include a one-year diagnostic warranty: if the system we tuned up has any problem within a year, the diagnostic visit is free.

Do you do pre-purchase HVAC inspections in Draper?

Yes. Canyon Comfort provides pre-purchase furnace and A/C inspections in Draper. Each visit includes standard tune-up work, measured readings and a same-day written System Health Report. Pricing is $110 for one system or $180 for both. Pre-Purchase HVAC Inspection →

What happens if my furnace or A/C breaks down after a tune-up?

If a system we tuned up breaks down within a year of the visit, the diagnostic visit is free — that’s our one-year diagnostic warranty, included with every tune-up. We come out, find the problem, and quote the repair, with no diagnostic charge standing between you and the answer.

My remodeled Draper home is uneven floor to floor — can you figure out why?

Yes. Canyon Comfort diagnoses airflow and comfort problems in remodeled Draper homes, where additions and layout changes can leave rooms underserved or ductwork mismatched. We measure airflow and static pressure to identify where the problem is before recommending corrections such as air balancing, duct sealing, return-air improvements, or other airflow changes.

Can you diagnose rooms that are always too hot or too cold in Draper?

Yes — uneven rooms are an airflow problem we diagnose with instruments, not guesses. The $250 Airflow Assessment measures static pressure, temperature differential, and airflow through the returns and supply vents. We test targeted adjustments, repeat the readings, and provide written findings. Not sure whether it’s the equipment or the airflow? Book the $80 diagnostic. If the equipment checks out and it’s an airflow problem, the $80 is credited toward the $250 Airflow Assessment.

Is it worth upgrading to a high-efficiency system?

Sometimes. Whether a high-efficiency system makes sense depends on the home, existing equipment, comfort problems, energy use, and the cost of the upgrade. Canyon Comfort does not sell or install new systems, so we can explain the options without having a replacement system to sell you.

Do you offer emergency furnace repair in Draper?

Yes — Canyon Comfort handles emergency furnace and heating repair throughout Draper, including no-heat nights, days, evenings and weekends. If it can’t be fixed that night we make sure you’re safe and comfortable and line you up with the exact part and a firm quote.

Does elevation really affect my furnace in Draper or SunCrest?

Yes. At Draper’s higher elevations a furnace produces noticeably less heat than its sea-level rating, and the burners should be set up for thinner air. On a tune-up or emergency visit we tune for the home and the elevation so the system runs efficiently and lasts — rather than running oversized, which causes short-cycling and early wear.

Is a fall furnace tune-up worth it in Draper?

Yes, especially up toward SunCrest, where elevation already makes a furnace work harder. A $110 furnace tune-up before the first cold night catches the weak igniters and tired parts that turn into no-heat calls, and it ends with a written System Health Report of actual readings.

Why is my multi-story Draper home so uneven?

The top-floor-bakes / basement-freezes problem is incredibly common in Draper’s larger homes, and it’s usually airflow and duct losses rather than furnace size. Air balancing, attic-duct sealing, added airflow, and zoning adjustments can even out the whole house — airflow is one of our specialties. More on even-temperature work →

Do you handle smart thermostats and air quality in Draper?

Yes. We can swap a smart thermostat on a repair or tune-up visit and handle airflow and air-quality upgrades. For a new system we will not take it on.

How fast can you reach Draper and SunCrest?

Usually the same day you call, inside our service hours: Monday–Friday 7am–10pm, Saturday 8am–10pm, and Sunday 8am–9pm. Draper and SunCrest both sit inside our core service area, roughly 20 miles south of downtown Salt Lake City. Call or text 801-960-5925 and we will get to you as fast as we safely can.

What happens if my Draper repair is too big for an emergency fix?

That’s where we save you the most. Bigger jobs do not get handed off — we diagnose the problem fully and quote the work ourselves. You can use any contractor you like, and we’ll never push it. And if it can’t be fixed that night, you can rent a portable A/C from us so you stay comfortable until it is.

What sets us apart

Every Draper tune-up ends with a System Health Report

After every tune-up you don’t just get an invoice — you get your system’s actual numbers. Before we call any tune-up complete, we measure airflow, static pressure, temperature split, and the electrical — plus a CO safety test on every furnace — then email you a Canyon Comfort System Health Report with the readings and what they mean in plain English. We also show you real photos of exactly what we found, and you always get before-and-after photos of the work. You’re not taking our word that it’s running right — you have the proof.

Services we offer here: A/C Repair · Furnace Repair · Heat Pumps · Mini-Splits · Tune-Ups · Emergency Repair · Air Quality · Ductwork · Duct Sealing · Gas Lines

Need a repair tonight in Draper?

Send your question online, or call or text and talk to us directly. Canyon Comfort covers Draper, SunCrest, and the whole Wasatch Front — Ogden down to Provo, Grantsville out to Coalville and Heber — for emergency A/C and furnace repair, portable A/C rental, and tune-ups, evenings and weekends included.

Nearby cities: Sandy · Riverton · Bluffdale · South Jordan